LCR Meter – 101A / 102A

Model AB-101A is a Micro-Controller based precision LCR meter. With basic accuracy of 0.2 %.it offers various test frequencies ,can display two selected parameters simultaneously, has internal Bias for electrolytic capacitors. Auto mode gives auto ranging & automatic component identification. Four wire measurement minimizes error in reading. RS232 Communication & Binning facilty upto 8 bins possible. Loading of pre-setted parameters also possible to save time.

Range Lock facility improves the speed of measurement at production.

SER & PAR modes are available.

Instruments are calibrated with our calibration & service facility center with standards having tracebility to National standards.

Optional accessories are Kelvin clip, SMD Tweezer, Capacitor Insertion Jig.

    101A / 102A      
  • Measures any Two parameters of R,L,C , Q & D simultaneously
  • Basic Accuracy 0.2% of reading
  • Full Auto Function & Auto Ranging/User defined functions.
  • User Prompt facility for best accuracy
  • Internal 2 Volt DC bias for Electrolytic capacitor
  • Selectable 100Hz(120Hz**) / 1 KHz measurement frequency.
  • Two LCD 16X2 display(one with big font)
  • Series or parallel measurement modes.
  • Four terminal measurements to increase accuracy
  • Calibration has tracebility to National standards.
  • RS232 communication with various optional software.
  • Limits comparator & Binning facility

Model AB-101A is a Micro-Controller based precision LCR meter. With basic accuracy of 0.2 %.it offers various test frequencies ,can display two selected parameters simultaneously, has internal Bias for electrolytic capacitors. Auto mode gives auto ranging & automatic component identification. Four wire measurement minimizes error in reading. RS232 Communication & Binning facilty upto 8 bins possible. Loading of pre-setted parameters also possible to save time.

Range Lock facility improves the speed of measurement at production.

SER & PAR modes are available.

Instruments are calibrated with our calibration & service facility center with standards having tracebility to National standards.

Optional accessories are Kelvin clip, SMD Tweezer, Capacitor Insertion Jig.   ** 120Hz is factory set option for 100Hz.  

Technical Specification

Variables measured

: R, L, C , Q & D

Modes (Equivalent circuit)

: Series & Parallel

Measurement Frequency

: User settable 100Hz (120Hz**)or 1KHz

Accuracy of measurement frequency

: ± 0.01 % of Nominal

Maximum voltage across component

: 0.3Vrms

Measurement update rate

: 2 per second

Maximum Time for valid reading after user connecting component

: 1 second

Display

: Two LCD 16X2 display(one with big font)

Connection to component under test

: 4 terminals BNC (F)

  Basic accuracy : ± 0.2% of Reading ± 1 digit
Parameter Measurement Ranges Ultimate resolution

R

0.001 Ω to 990 MΩ

1m Ω

L

0. 001μH to 9900 H

0. 001μH

C

0.001 pF to 99mF

0. 001pF

Q

0.001 to 999

0.001

D

0.001 to 999

0.001

 

Conditions for basic accuracy :

Measurement Frequency

100Hz

1KHz

Range of Inductance (Q>10)

4mH- 2000H

400 mH-200 H

Range of Capacitance (Q>10)

4nF-2000 mF

400pF-200 mF

Range of resistance (Q<0.1)

2Ω - 1MΩ

2Ω- 500KΩ

  ** 120Hz is factory set option for 100Hz   For 0.01

Lock – Locks the range to the component’s range.Increases the speed & suitable for batch production.

 

Trim : Can Trim any component
Input protection

: The input is protected against connection of capacitors of up to 10mF charged to not more than 50V

Operating temperature range : 0 °C to 50 °C
Power Supply : 230VAC ± 10%, 50-60 Hz
Fuse : 20 mm, 250mA (Glass)
Size : 90mm(H),395mm(W),305mm(D)
Weight : Standard 6 Kgs approx.

Optional Accessories : a) Kelvin clip b)SMD Tweezer c)Capacitor Insertion Jig.

  • Download Excel File
  • Download PDF File
  • Download Word File

Facebook

LinkedId